Overhead Rigging; Dmx-512 Control Connection - SGM Idea Par LED Zoom RGB Instruction Manual

Overhead rigging

Screw the bolt of the clamp into the hold of the bracket, and tighten the screw underneath.
Pull the safety-rope through the holes on the bracket of the base and over the trussing system or a safe
fixation spot. Insert the end in the carabine and tighten the safety screw.

DMX-512 control connection

The product has a DMX 512 input fitted with standard 5-pin XLR connectors. Screened cables in compliance
with EIA RS-485 specifications and the following characteristics must be used for connections:
- 2 conductors plus screen
- 120Ohm impedance
- low capacitance
- max. transmission rate 250kBaud.
Cable connections:
Address 13
Please note: to ensure maximal stability, when the voltage is 120V, only six devices may be connected
XM368-V1.2 -B
see illustration, taking care with the screen, which must be connected
to Pin 1
Address 7
6
GB
Address 1
Idea Par Led Zoom RGB