SGM Idea Par LED Zoom RGB Instruction Manual page 14

b) Editing via the external controller
Call up the first scene in your controller now.
Press [ENTER], the display to be edited.
1.
Select "SC01" by pressing [UP] or [DOWN] button.
2.
Select the channel no. you would like to edit by pressing [UP] or [DOWN] button.
3.
4. Press [ENTER], the display shows "C-01".
5. Press [UP] or [DOWN] button .the display shows " FADE ".（Adjust fade speed）
6. Press [ENTER], the display to be adjust fade speed.
Select "CEDT" by pressing [UP] or [DOWN] button.
7.
Press [ENTER], the display shows "OFF".
8.
Press [UP] or [DOWN] button .the display shows "ON".
9.
10. Press [ENTER], the display shows "SC02". You successfully downloaded the first scene.
11. Adjust the Step-time as described above under point 12.
12. Call up the second scene in your controller now.
13. Repeat steps 5-11 until all desired scenes are downloaded.
14. Press [MENU] to exit. The number of steps can be defined under "STEP" and the scenes can be called
up under "RUN"
XM368-V1.2 -B
14
GB
Idea Par Led Zoom RGB