Overview; Safety Instructions - SGM Idea Par LED Zoom RGB Instruction Manual

GB

OVERVIEW

SAFETY INSTRUCTIONS

Be careful with your operations. With a dangerous voltage you can suffer a
dangerous electric shock when touching wires!
This device has left the factory in perfect condition. In order to maintain this condition and to ensure a safe
operation, it is absolutely necessary for the user to follow the safety instructions and warning notes written
in this user manual.
Important:
Damages caused by the disregard of this user manual are not subject to warranty. The
dealer will not accept liability for any resulting defects or problems.
If the device has been exposed to temperature changes due to environmental changes, do not switch it on
immediately. The arising condensation could damage the device. Leave the device switched off until it has
reached room temperature.
This device falls under protection-class I. Therefore it is essential that the device be earthed.
The electric connection must carry out by qualified person.
The device shall only be used with rate voltage and frequency.
Make sure that the available voltage is not higher than stated at the end of this manual.
Idea Par Led Zoom RGB
1. Housing
2. LEDS
3. Floor-stand
4. Menu-button
5. Up-button
6. Down-button
7. Enter-button
8. Power input
9. DMX output
10. DMX-input
CAUTION!
3
XM368-V1.2 -B