BDI format Assembly Instructions page 5

Q x 2
Step 7
Attach Pulls (K) using Screw (M). With the grippy side facing down, insert
Center Drawer Liner (P) into the center drawer and Side Drawer Liner (Q)
into both side drawers. Place Format Desk in desired location. Once all of
the electrical wires are routed, install Front Kick Panel (N) as shown below.
The rear side of panel has magnets that will hold the panel in place
The Format Desk is designed to permit placement in front of an electrical
outlet for easier wiring access.
format
6301
DESK
M x 4
K x 2
P x 1
Note:
.
N
a s s e m b l y i n s t r u c t i o n s
5
bdiusa.com
O
customerservice@bdiusa.com