BDI format Assembly Instructions page 4

Step 6 (optional)
Attach Magnets to AC power strip (power strip not included)
Cleaning of power strip surface with rubbing alcohol will ensure best adhesive
bond. **UNPLUG POWER STRIP FROM POWER SOURCE BEFORE CLEANING**
Remove Adhesive Foam/Magnets (J) from the Upper Horizontal Beam (F). Peel film
from side of the Adhesive Foam/Magnets (J) and attach to clean, dry back side of AC
power strip.
1.
1.
J
2.
2.
format
6301
DESK
Attach AC power strip to inside of Upper Horizontal Beam (F) as shown
in illustration below.
Use the slot holes provided in Upper Horizontal Beam (F) to run all
wires to and from the desk. Keep all wires behind folded metal lip—
failure to do so will prevent Back Panel (O) and/or Front Kick Panel (N)
from closing properly.
3.
3.
4
* AC Power Strip Not Included
a s s e m b l y i n s t r u c t i o n s
bdiusa.com
customerservice@bdiusa.com