Setting Digital And Analog Audio Output (Output Selection) - Pioneer Super Tuner III DVH-P7050 Owner's Manual

Initial Settings for
DVD player
Setting digital and analog audio
output (OUTPUT SELECTION)
You can set linear PCM audio output for both
digital and analog output. Set audio output
correctly to match the components you are
using with this unit.
Precaution
• If the setting is incorrect there will be no
sound so be sure to read the manuals of the
connected components.
1 Move the joystick up/down to select
in the second
OUTPUT SELECTION
.
MENU
is indicated in blue.
OUTPUT SELECTION
2 Click the joystick.
Audio output setting menu is displayed.
3 Move the joystick up/down to select the
desired audio output setting.
The currently set audio output setting is indi-
cated the mark " ". The audio output setting
selected with the joystick is indicated in blue.
Output setting
48kHz
96kHz
SET UP
4 Click the joystick.
The selected audio output setting is set.
• With discs featuring 96 kHz recording, if you
select the
from digital output.
• With discs do not feature a CSS (Content
Scrambling System) copy guard signal, a 96
kHz digital signal is output.
• When using this unit with a Pioneer Multi-
channel processor (DEQ-P7050), select
setting. If you select the
sound will be output when playing discs fea-
turing 96 kHz recordings.
• Pressing
ous display.
Setting detail
Select this setting when using
digital connections. A 48 kHz
signal is output regardless of
the audio sampling frequency.
A 96 kHz signal is converted to
a 48 kHz signal. (Initial setting)
Select this setting when using
analog connections.
The signal is output with the
same frequency as the audio
sampling frequency. With a 96
kHz signal, you can enjoy
exceptionally high sound qual-
ity.
Notes
setting, audio is not output
96kHz
96kHz
takes you back to the previ-
RETURN
Section
09
48kHz
setting, no
En 69