Setting The Am Tuning Step; Switching The Warning Tone; Switching The Auxiliary Setting - Pioneer Super Tuner III DVH-P7050 Owner's Manual

Multi-cd control high power dvd/vcd/cd player with fm/am tuner
Hide thumbs Also See for Super Tuner III DVH-P7050:
Table of Contents

Advertisement

Section
Initial Settings
10
1 Press
to select
F
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
2 Select the
FM
Pressing 1 or ¡ will switch the FM tuning
step between 50 kHz and 100 kHz. The selected
FM tuning step will appear in the display.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.
Note
• If seek tuning is performed in 50 kHz steps,
stations may be tuned in imprecisely. Tune in
the stations with manual tuning or use seek
tuning again.

Setting the AM tuning step

The AM tuning step can be switched between 9
kHz, the preset step, and 10 kHz. When using
the tuner in North, Central or South America,
reset the tuning step from 9 kHz (531 – 1,602
kHz allowable) to 10 kHz (530 – 1,640 kHz allow-
able).
1 Press
to select
F
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
72
En
.
FM
appears in the
FM Step
on the head unit also
tuning step with 1 or ¡.
.
AM
appears in the
AM Step
on the head unit also
2 Select the AM tuning step with 1 or ¡.
Pressing 1 or ¡ will switch the AM tuning
step between 9 kHz and 10 kHz. The selected
AM tuning step will appear in the display.
• Pressing 2 or 3 on the head unit also per-
forms the same operation.

Switching the warning tone

If the front panel is not detached from the head
unit within five seconds of turning off the igni-
tion, a warning tone will sound. You can turn off
this warning tone.
1 Press
to select
F
WARN
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
on or off with E or e.
2 Select
WARN
Pressing E or e will switch
on and off and that status will be displayed (e.g.,
).
Warning :ON
• Pressing 5 or ∞ on the head unit also per-
forms the same operation.

Switching the auxiliary setting

It is possible to use auxiliary equipment with
this unit. Activate the auxiliary setting when
using auxiliary equipment connected to this
unit.
1 Press
to select
F
AUX
Press
repeatedly until
F
display.
• Pressing
FUNCTION
performs the same operation.
.
appears in the
Warning
on the head unit also
between
Warning
.
appears in the
AUX
on the head unit also

Advertisement

Table of Contents
loading

Table of Contents