Din Rear-Mount; Installation Using The Screw Holes On The Side Of The Unit - Pioneer Super Tuner III DVH-P7050 Owner's Manual

Multi-cd control high power dvd/vcd/cd player with fm/am tuner

Hide thumbs Also See for Super Tuner III DVH-P7050:

Table of Contents

Installation

DIN rear-mount

1 Remove the frame.

2 Fastening the unit to the factory radio mounting bracket.

Factory radio mounting bracket

Frame

Insert the release pin into the

hole in the bottom of the

frame and pull out to remove

the frame. (When reattaching

the frame, point the side with

a groove downwards and

attach it.)

Select a position where the screw holes of the

bracket and the screw holes of the head unit

become aligned (are fitted), and tighten the

screws at 2 places on each side. Use either

truss screws (5 × 8 mm) or flush surface

screws (5 × 9 mm), depending on the shape of

the screw holes in the bracket.

Screw

Dashboard or Console

Section

101

Table of Contents