Audio Adjustments; Introduction Of Audio Adjustments - Pioneer Super Tuner III DVH-P7050 Owner's Manual

Section

Audio Adjustments

08
Introduction of audio
adjustments
1
display
AUDIO
Shows the audio adjustments status.
2
SUBWOOFER
Shows when the subwoofer in on.
Press to display the audio function names.
A
Press repeatedly to switch between the follow-
A
ing audio functions:
(balance adjustment)—
Fad
adjustment)—
Bass
(loudness)—
Loud
(non fading output on/off)—
(subwoofer2)/
Non Fad
ting)— (high pass filter)—
HPF
adjustment)
• When the subwoofer controller setting is only
S.W Control:EXT
(Refer to page 73.)
• You can select the
Subwoofer output is switched on in the
• When the subwoofer controller setting is only
S.W Control:EXT
output on/off mode. (Refer to page 73.)
• You can select the non fading output setting
mode only when non fading output is switched
on in the non fading output on/off mode.
54 En
1 2
indicator
(equalizer curve
EQ
(bass)— (treble)—
Treble
(subwoofer1)/
Sub-W1
Sub-W2
(non fading output set-
(source level
SLA
, you cannot switch the
only when
Sub-W2
, you can switch the non fading
• Pressing
forms the same operation.
• When selecting the FM tuner as the source,
you cannot switch to
• To return to the playback display, press
BAND/ESC
Important
• If the Multi-channel processor (DEQ-P7050) is
connected to this unit, the audio function will
be changed into the Multi-channel proces-
sor's audio menu. For details, see the Multi-
channel processor (DEQ-P7050) owner's
manual.
Notes
• If you do not operate the audio function within
about 30 seconds, the display is automatically
returned to the source display.
• Audio menu functions change depending on
the rear output setting in the initial setting
Non Fad
menu. Refer to Setting the rear output and
subwoofer controller on page 73.
.
Sub-W1
.
Sub-W1
on the head unit also per-
AUDIO
.
SLA
.