Quick Reference Drawer; Connecting Machine To Power Source - Bernina Bernette 55 Manual

Polarized
attachment plug
Conductor intended
to be grounded
EN Sewing table
Keep the snap-in sewing table horizontal,
and push it in the direction of the arrow.
(1)
The inside of the snap-in sewing table can
be utilized as an accessory box.
To open, tilt the cover towards you. (2)
EN

Quick reference drawer

To open pull the draw against you, to close
push it back. The quick reference shows
you recommended settings for the stitches
and application. (3)
In this quick reference drawer you will find
the most important information on sewing
at a glance.
The color coding of the stitches is the
following:
green (Practical Stitches) = Practical Stitches
orange (Decorative Stitches) = Decorative
Stitches
blue (Stretch Stitches) = Stretch Stitches
red (Quilt Stitches) = Quilt Stitches
Connecting machine to
EN
power source
Connect the machine to a power source as
illustrated.
Attention:
Unplug power cord when machine is not in
use.
Sewing light
Press main switch for power and light on.
("l")
Foot control
Foot control regulates the sewing speed.
Attention:
Consult a qualified electrician if in doubt as to
connect machine to power source.Unplug
power cord when machine is not in use. The
appliance must be used with the foot
controller 4C-315A (100V), 4C-316B (110-
120V area) / 4C-326G (230V), 4C-326C (220/
240V area) manufactured by MATSUSHITA
ELECTRIC (TAIWAN) CO., LTD.
IMPORTANT NOTICE
If the appliance has a polarized plug (one
blade is wider than the other). To reduce the
risk of electric shock, this plug will fit in a
polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not modify the
plug in any way.