Automatic Needle Threader; Thread Tension - Bernina Bernette 55 Manual

EN

Automatic needle threader

· Raise the needle to its highest position
· Press lever (A) right down
· The threader automatically swings to the
threading position (B)
· Take the thread round the hook (C)
· Take the thread in front of the needle so
that the thread will insert into the hook
(D) from bottom to top
· Release lever (A)
· Pull the thread through the needle eye.
Attention:
Turn power switch to "O"!
EN

Thread tension

Upper thread tension
Basic thread tension setting: "4".
To increase the tension, turn the dial to the
next number up. To reduce the tension,
turn the dial to the next number down.
A. Normal thread tension
B. The thread tension is too loose
C. The thread tension is too tight