Bringing Up The Lower Thread; Starting To Sew - Bernina Bernette 55 Manual

Bringing up the lower
EN
thread
Hold the upper thread with the left hand.
Turn the handwheel forward until the
needle is raised, (1) again.
Pull on the upper thread to bring the lower
thread up through the stitch plate hole. Lay
both threads to the back under the presser
foot. (2)
EN

Starting to sew

Reverse sewing
At the end of seam, press down the reverse
sewing lever (A). Sew a few reverse
stitches. Release the lever and the machine
will sew forwards again. (1)
Removing the work
Turn the handwheel towards to bring the
thread take up lever to its highest position,
raise the presser foot and remove the work
towards the back. (2)
Cutting the thread
Cut both threads with the thread cutter (B)
located on the left rear side of the face
plate. (3)