Table of Contents
Advertisement
EN
Cording foot
Presser foot available as optional accessorie
Decorative effects, cushions, tablecloths,
etc.
Set the machine as illustrated. Various
stitches are suitable for sewing on cord,
e.g. Zig-zag, Triple zig-zag, decorative
stitches.
Pattern selector on " "
Set stitch length control between
"1" - "4".
Set stitch width control between
"3" - "5". (model 55)
Set stitch width control between
"3" - "7". (model 65/80e/90e)
Insert the cord between the spring covering
the cord groove and the foot. The cord
should run in the groove. One, two or
three cords can be sewn on. The stitch
width is adjusted according to the number
of cords and the stitch selected. (1/2)
a. model 55
b. model 65/ 80e/90e
EN
Free motion darning
Presser foot available as optional accessorie
Set the machine as illustrated. Move the
drop feed control to right side to lower the
feed dogs. (1)
Remove the presser foot holder. (2) (see
page 28)
Pattern selector on " "
Turn the stitch length dial to "0".
Turn the stitch width dial to "0".
Attach the darning foot to the presser foot
holder. The lever (A) should be behind the
needle clamp screw (B). Press the darning
foot firmly from behind with your index
finger and tighten the screw (C). (3)
First sew round the edge of the hole (to
secure the threads). (4) First row: Always
work from left to right. Turn work by 1/4
and oversew.
A darning ring is recommended for easier
sewing and better results.
Move the drop feed control to left side for
normal use.
Hide quick links:
Advertisement
Table of Contents
