Part D Engineering; D1. Engineering Procedure - YOKOGAWA YFGW410 User Manual

Part D Engineering
This part describes the work flow and content content of the engineering in order to use
YFGW410 PROFINET interface.
D1. Engineering Procedure
Engineering of
PROFINET system
System
(E.g. Siemens STEP7)
engineer
PROFINET related
engineering described
in this manual
Figure D1-1 Engineering Flow in Field Wireless System Construction
Figure D1-1 corresponds to Figure D1-1 of the User's Manual of YFGW410 (IM 01W02D01-
01EN) and shows the full picture of the field wireless system construction. The dashed rounded
rectangle part is the engineering flow related to PROFINET. It consists of the following two parts:
• Engineering of PROFINET system including setting of PROFINET IO Controller and
YFGW410 as a PROFINET IO Device
• Engineering of field wireless system including settings of YFGW410 PROFINET interface
This document describes the above mentioned PROFINET-related engineering. Regarding field
wireless system engineering with FWMC (Field Wireless Management Console) Configurator,
this document only describes the items specific to YFGW410 PROFINET interface. Refer to the
User's Manual of YFGW410 (IM 01W02D01-01EN) for the full topics of field wireless system
engineering.
Engineering of field wireless network
Startup engineer or
wireless engineer
* Including PROFINET interface settings
GSDML
file
Configuration data
download to YFGW410
Startup engineer or
wireless engineer
Engineering of YFGW510
(Field wireless access point setup tool)
Startup engineer or
wireless engineer
YFGW410, YFGW510, YFGW610
Person in
charge of devices
Check and adjust wireless connection
Startup engineer or
wireless engineer
Backup configuration data
Backup file
User or
startup engineer
Save the communication quality data
User or
startupengineer
Operation
Operators
<D1. Engineering Procedure>
Shippment
(Configurator)
Provisioning
file
(Configurator)
installation
(Monitor)
(Configurator)
(Monitor)
Device management
Maintenance staff
D1-1
Field wireless device
(FieldMate or
Person in
Device vendor's tool)
charge of devices
Set device parameters
(FieldMate・PRM or
Person in
Device vendor's tool)
charge of devices
Field wireless device
installation
Person in
charge of devices
Set and adjust
device parameters
Person in
(FieldMate・PRM) charge of devices
Loop check
User or
startup engineer
FD0101.ai
IM 01W02D01-21EN