D2. Tools Used For Engineering - YOKOGAWA YFGW410 User Manual

D2. Tools Used for Engineering
This chapter corresponds to Chapter "D2. Tools to be Used for the Engineering" of the User's
Manual of YFGW410 (IM 01W02D01-01EN). Refer to the chapter of the User's Manual for details
such as how to launch FWMC Configurator and how to set up field wireless network.
Table D2-1 shows the engineering procedure and tools used for the engineering.
Table D2-1 Engineering Procedure and Tools
Item
Engineering of
PROFINET system
(Refer to Chapter D3)
Engineering of
PROFINET interface
(Refer to Chapter D4)
Procedure
Configuration of PROFINET IO Controller
• Setting IO Controller's IP address, etc.
Configuration of PROFINET IO Device
• Importing GSDML file of YFGW410 PROFINET IO Device
• Specifying the method to assign IP address of YFGW410
PROFINET IO Device
• Setting PROFIsafe F-Parameter
• Setting IO Cycle Time
Assignment of PROFINET slots
• Inserting I/O modules to slots of the IO Device
Programming PROFINET IO Controller
• Make program with PLC programming language
Configuration of field wireless system related to PROFINET
interface
• Selecting and enabling the field network port of YFGW410
on which PROFINET interface operates
• Configuring the publication data from/to field wireless de-
vice
• Mapping between PROFINET slots and publication data
<D2. Tools Used for Engineering>
D2-1
Tool
Engineering tool
provided by
PROFINET IO
Controller vendor
FWMC Configurator
IM 01W02D01-21EN