Entering A Group Mmsi Number - Uniden MHS135 Owner's Manual

5. Enter the MMSI number as described previously. When
the ninth digit is correct, press ENTER-H/M/L and the
cursor moves to the Name field.
6. Enter the name as described previously. When you have
entered the name, press ENTER-H/M/L.
7. The radio displays the new MMSI number and name
and asks you to confirm. To save this MMSI number
and name, press ENTER-H/M/L. To cancel this MMSI
number, press CLR/SCAN.
# NOTE: Be sure you entered the number correctly before
confirming the entry. You can only save the user MMSI once.
8. Before saving the number, the radio displays the
message Confirm number! User MMSI data is Permanent!
Press ENTER-H/M/L to accept this MMSI. Press CLR/
SCAN to return to the directory.

Entering a group MMSI number

You can change the group MMSI number as often as you
want. The first digit of a group MMSI is fixed at "0." Follow
the steps below to enter a group MMSI number into the
radio:
Press and hold
1. Press and hold MENU/CALL to display the Call Menu.
2. Scroll to DSC Setup and press ENTER-H/M/L.The DSC
Setup menu displays.
3. Scroll to Group MMSI and press ENTER-H/M/L. The
Group MMSI screen displays.
4. Group MMSI numbers always start with a 0, so that digit
is already entered for you. Enter the MMSI number as
described previously. When the ninth digit is correct,
E-28
Use the up and down arrows
to adjust each of the eight-
digits in turn.
DSC Setup
Group MMSI
Uniden MHS135 Radio Owner's Manual
Group MMSI
16
0________
USA
Back
Save
[MENU]
[ENT]
Exit
[CLR]