Introduction For Buttons On Remote Controller - Gree GSAF209XAE Owner's Manual

Introduction for buttons on remote controller

Note:
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press the
corresponding button on the remote controller that the unit will keep the original
running status.
● After putting through the power, the air conditioner will give out a sound.
Operation indicator "
conditioner by using remote controller.
● Under on status, pressing the button on the remote controller, the signal icon "
on the display of remote controller will blink once and the air conditioner will give
out a "de" sound, which means the signal has been sent to the air conditioner.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator "
The colour is different for different models), and indoor unit will give out a sound.
2
MODE button
Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according
to ex-factory setting. Set temperature can't be adjusted and will not be displayed
as well. Press "FAN" button can adjust fan speed. Press "
adjust fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Cool
indicator " "on indoor unit is ON. Press "▲" or "
rature. Press "FAN" button to adjust fan speed. Press "
fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Dry indicator "
be adjusted. Press "
● When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF. Press "FAN" button to adjust fan speed. Press
" " / " " button to adjust fan blowing angle.
" is ON (red indicator). After that, you can operate the air
AUTO COOL
" on indoor unit is ON. Under dry mode, fan speed can't
" / " " button to adjust fan blowing angle.
" on indoor unit's display is ON (green indicator.
DRY FAN
9
HEAT (NOT APPLICABLE)
" / " " button can
" button to adjust set tempe-
" / " " button to adjust
"