Page 1
Wide Dynamic Range / Day & Night COLOR DOME TYPE CAMERA MANUAL DWC-540PV Pixim Seawolf / WDR...
Page 2
The lightning flash with an arrowhead symbol, within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
1. Features Our WDR camera is a superb wide dynamic range camera which achieves 120dB max(102dB typical) of dynamic range of the image by implementing PIXIM's Seawolf digital imaging system. With Seawolf digital imaging system, - Delivers high-resolution, crystal clear images that accurately capture every aspect of any scene - Offers the highest resolution of 690TVL(horizontal) - Ultra-wide dynamic range imaging accurately captures all of the critical details in a...
2. Cable Connection and OSD Control 1) Cable Connection ( DC12V Type ) (Dual Type DC12/AC24V) 2) OSD Control ② ② ② ② SETUP button : Used for the menu display. This button can be used to confirm settings after changing the value of the selected function or current conditions. ③...
Page 6
3 3 3 3 ..Setup Menu Operation 1) 1) 1) 1) In In In In the menu the menu the menu the menu Use ▲, ▼ buttons to move menu, ◀, ▶ buttons to change the settings and press button shortly to select or enter.
Page 7
4) 4) 4) 4) EXPOSURE EXPOSURE EXPOSURE EXPOSURE To enter EXPOSURE menu, press button at MAIN>EXPOSURE. EXPOSURE Default Descriptions EXPOSURE Descriptions In NTSC system, the entire color tone on the monitor may continuously <WDR MID> Medium level of the dynamic range control for each PRESETs. move reddish and greenish.
Page 8
5 5 5 5 ) ) ) ) DAY/NIGHT DAY/NIGHT DAY/NIGHT DAY/NIGHT To enter EXPOSURE menu, press button at MAIN>DAY/NIGHT>AUTO... IMPORTANT!!! IMPORTANT!!! IMPORTANT!!! IMPORTANT!!! IMPORTANT!!! IMPORTANT!!! IMPORTANT!!! IMPORTANT!!! DAY- - - - >NIGHT and NIGHT >NIGHT and NIGHT >NIGHT and NIGHT- - - - >DAY operations must be examined and >NIGHT and NIGHT >DAY operations must be examined and >DAY operations must be examined and...
Page 9
6) 6) 6) 6) 3D NR 3D NR 3D NR 3D NR To enter EXPOSURE menu, press button at MAIN>3D NR 3D NR Default Descriptions Determines the depth of Three Dimensional Noise Reduction. DEPTH High value reduces the noise strongly but the comet effect may occur for the fast moving object and vice versa.
Page 10
PICTURE Factory PICTURE Factory Descriptions Descriptions CONTROL Default PICTURE Factory CONTROL Default Descriptions CONTROL Default Sets ATW Normal, ATW Desat, ATW Xtnd or MANUAL. Sets ATW Normal, ATW Desat, ATW Xtnd or MANUAL. ATW NORMAL – Compensates automatically in range of 2800K-7500K. ATW NORMAL Sets ATW Normal, ATW Desat, ATW Xtnd or MANUAL.
Page 11
9) 9) 9) 9) SPECIAL SPECIAL SPECIAL SPECIAL SPECIAL Default Descriptions If it is set to ON and motion is detected, MOTION message will MOTION appear on the monitor. See ‘7.9.1 MOTION ’ for settings. If set to ON, it is available up to 6 privacy masks. PRIVACY MASK See ‘7.9.2 PRIVACY menu’...
Page 12
② ② ② ② PRIVACY AREA PRIVACY AREA PRIVACY AREA PRIVACY AREA Up to 6privacy area can be programmed in size, position and mask color. Use joystick to change size, position and mask color. button at ,ON..>, the button, the Right after pressing Right after one more pressing 1st zone appears on top-left corner in orange.
An example of mask when resizing by . ▼, ▲, An example of mask when relocating. ▲, ▼ buttons button longer than 2 sec. to return to previous menu. Press 10) D 10) D- - - - EFFECT 10) D 10) D EFFECT EFFECT...
If there are problems in operation, please refer to the items below. If the problem persists, 4 4 4 4 ..Troubleshooting please contact the agent you purchased this product from Problems Troubleshooting • Please check the power connection. Nothing appears on the screen.
Need help?
Do you have a question about the DWC-540PV and is the answer not in the manual?
Questions and answers