Example: M241
Echoing may be controlled in some firmwares with M111
M245: Start cooler
Example: M245
used to cool parts/heated-bed down after printing for easy remove of the parts after print
M246: Stop cooler
Example: M246
M300: Play beep sound
Usage: M300 S<frequency Hz> P<duration ms>
Example: M300 S300 P1000
Play beep sound, use to notify important events like the end of printing.
on
R2C2
electronics.
M301: Set PID parameters - Hot End
Example: M301 P1 I2 D3 C5
Sets Proportional, Integral and
Derivative values for hot end, the value C refers to an extrusion rate.
Alternate implementation
Example: M301 W125
M303: Run PID tuning
Hotend Usage: M303
S<temperature> C<cycles> Bed Usage: M303 E-1 C<cycles> S<temperature> Example: M303
C8 S175
Generate Proportional, Integral and Derivative values for the hotend or bed (E-1). Send the
appropriate code and wait for the output to update the firmware.
M304: Set PID parameters - Bed
FiveD
Support
FiveD Teacup Sprinter Marlin
Support
FiveD
Teacup Sprinter
Support
97
See working example
Teacup Sprinter Marlin
PID
Repetier
PID
PID
Marlin
PID
Repetier
Repetier