Table of Contents
Advertisement
10. To make the forming quality better, please set up a reasonable printing speed. Higher printing
speed can reduce the printing time, but can result in poor forming quality; lower printing speed
results in longer printing time, but higher forming quality.
11. After using the printer for a period of time, you need to check critical parts such as the
synchronous belt, push rod and screws if they are loosened.
Printer parameters:
Forming size: 140mm*140mm*250mm
Forming principle: FDM (Fused Deposition Modeling)
Material type: 1.75mm ABS or 1.75 PLA
Printing speed: 10-100mm/S
Recommended layer thickness: 0.1-0.3mm
Connection method: USB/SD card
Power supply: AC 110-240Ｖ
Software: Repetier-Host
Nozzle: 0.4mm diameter／single nozzle
2
Advertisement
Table of Contents
