Installing Motor - KEYES ROSTOK Manual And Manual

3. Installing motor:

Materials needed are shown in below pic 7:
List:
3pcs 42 stepper motor
12pcs M3*12 screw
12pcs M3 shim
3pcs synchronous wheel
Install as following pic 8 shows: Install synchronous wheel. Don't screw it down too tight
because it will be readjusted during belt installation later.
Install as following pic 9 shows: Mount the stepper motor onto bracket holder. Please pay
extra attention to the direction of motor connection ports, it should point at the left or
right of below pic 10 for easy connection.
12