KEYES ROSTOK Manual And Manual page 55

For Extruder, all use the default ones.
3
Printing shape setup, according to below picture.
4
A. In the red box, you can enter your printer's name. Mine is Keyes 3D
B. Select Rostock printer for printer type.
C. Home X:0 Home Y:0
D. Printable radius: 80mm
E. Printing height: 275mm
1). After the above setup, we can link the printer to our computer. Click the connect button as below picture
shows.
If you see the button as below picture, the connection is succeeded.
Home Z:Max
53