Elegant multispline motion controller
based on cubic Bezier curves. This allows for much better description of arcs and will result in
much higher quality prints with a much lower data throughput requirements."
Category:
Model manufacturing software/zh cn
9. LCD Menu details
Prepare:
Disable Steppers: so you can manually pull the extruder and the printing stage.
AutoHome: all axis return to 0
Preheat PLA: heating PLA in advance
Preheat ABS: heating ABS in advance
Cooldown: cool down the extruder head
Move Axis: move all the axis
Move 10mm Move 1mm
"will not use G-code. It will use a custom language
101