Launching Configuration Cloning Utility Gui; Windows Embedded Standard 7 And Windows 7 Professional - Honeywell Thor VM2 User Manual

Launching Configuration Cloning Utility GUI

To launch the Client Configuration Utility follow the instructions below for the operating system installed on the Thor VM2.
Windows Embedded Standard 2009
1. Locate the CCU icon either on the desktop or by selecting
tion Cloning.
2. Double-tap the icon to launch the CCU.

Windows Embedded Standard 7 and Windows 7 Professional:

1. Locate the CCU icon either on the desktop or by selecting
tion Cloning.
2. Right click on the icon.
3. Select Run as administrator to launch the CCU.
It is necessary to run the CCU as an administrator because the CCU must be able to access and make changes
to the Windows registry.
Rather than selecting to run as administrator each time, right click on the CCU icon and select Properties. Tap
the Compatibility tab and check Run this program as an administrator. This modification affects the current
user only unless Change settings for all users is tapped before changing the privilege level.
If a User Account Control message is displayed, you must allow the CCU to make changes to the computer.
5 - 52
(Start) > All Programs > Honeywell >Configura-
(Start) > All Programs > Honeywell >Configura-