Honeywell Thor VM2 User Manual page 121

AC/DC Behavior
When the AC/DC power scheme/plan is selected and external power is present the Thor VM2 behaves as
described below. If external power is not present, refer to the
Thor VM2 is Off
Conditions
The Thor VM2 is Off and external power is available, such as:
• Thor VM2 is installed on a powered Smart Dock with the dock power switch On
• Thor VM2 is already mounted to a dock and external power is applied to the dock
Result
The Thor VM2 boots when the Power button is pressed. Once booted the Thor VM2 follows the AC/DC
power scheme/plan with timers reset after bootup.
Thor VM2 is On
Conditions
The Thor VM2 is On (but powered by the UPS battery) and gets external power, such as:
• Thor VM2 is installed on a powered dock with the dock power switch On
• Thor VM2 is already mounted to a dock with the dock power switch On and truck power is applied to
the dock
• Thor VM2 is already mounted to a dock and the dock power switch is turned On
Result
The Thor VM2 continues to run and follows the AC/DC power scheme/plan with timers reset at power
connection.
UPS (page 5-30) section for Thor VM2 behavior.
5 - 23