Table 9: Status LED on the Management Port on EX3200 Switches
LED
Status
Related
Documentation
Network Port LEDs in EX3200 Switches
Copyright © 2017, Juniper Networks, Inc.
Color
Green
See
Rear Panel of an EX3200 Switch on page 10
Connecting a Device to a Network for Out-of-Band Management on page 137
Each network port on the switch has two LEDs. The four figures in this topic show the
location of those LEDs:
Figure 10 on page 21
shows the location of the LEDs on the network ports on the front
panel.
Figure 11 on page 22
shows the location of the LEDs on the uplink module ports on the
SFP uplink module.
Figure 12 on page 22
shows the location of the LEDs on the uplink module ports on the
SFP+ and SFP+ MACsec uplink modules.
Figure 13 on page 22
shows the location of the LEDs on the uplink module ports on the
XFP uplink module.
Figure 10: LEDs on the Network Ports on the Front Panel
Chapter 2: Chassis Components and Descriptions
State and Description
On steadily—Administrative status is enabled.
Off—Administrative status is disabled.
for port location.
21