Front Panel Of An Ex3200 Switch; Chassis Components And Descriptions; Figure 1: Ex3200 Switch With 48 Gigabit Ethernet Ports; Figure 2: Ex3200 Switch With 24 Gigabit Ethernet Ports - Juniper EX3200 Hardware Manual

Front Panel of an EX3200 Switch

Related
Documentation
Copyright © 2017, Juniper Networks, Inc.
Removing a Fan Tray from an EX3200 Switch on page 160
Installing an Uplink Module in an EX3200 Switch on page 167
Removing an Uplink Module from an EX3200 Switch on page 169
Installing a Transceiver on page 173
Removing a Transceiver on page 175
The front panel of an EX3200 switch consists of the following components:
10/100/1000Base-T Gigabit Ethernet ports, some or all of which are enabled for Power
over Ethernet (PoE)
Uplink module ports—SFP, SFP+, or XFP ports (Installing the uplink module is an
optional feature.)
LCD panel and the LCD navigation buttons
Chassis status LEDs
Network port LEDs
Figure 1 on page 9 shows the front panel of an EX3200 switch with 48 Gigabit Ethernet
ports. Figure 2 on page 9 shows the front panel of an EX3200 switch with 24 Gigabit
Ethernet ports. Models are available that have either all ports equipped for Power over
Ethernet (PoE) or only 8 ports equipped for PoE. All ports have 10/100/1000Base-T
Gigabit Ethernet connectors.

Figure 1: EX3200 Switch with 48 Gigabit Ethernet Ports

Figure 2: EX3200 Switch with 24 Gigabit Ethernet Ports

Chassis Status LEDs in EX3200 Switches on page 18
Rear Panel of an EX3200 Switch on page 10
Network Port LEDs in EX3200 Switches on page 21
Chapter 2: Chassis Components and Descriptions
9