Advanced Settings - SAGEMCOM D16V User Manual

9. Advanced settings

9.1.
Base master PIN code
Your base station code (default setting 0000) is required to access certain security functions. This
code can include 8 digits.
.Select "advanced set" using the or key, press
1. Press
"change pin " appears on the screen. Press
2.
The base station code entry screen is displayed.
3. Enter your old code first. Each time a digit is entered the «_» is replaced by a «*».
Press
4. Enter your new PIN code. Each time a digit is entered the «_» is replaced by a «*».
5. Press
Note!
Carefully note your base station code. You will need it to change certain settings.
9.2.
Association handset & base
This function allows you to register a new handset on your base.
2 . Using the
. Select "advanced set" using the or key, press
1. Press
D16V/D18V/D21V
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the «_» is
replaced by a «*».
4. Press and hold
the base goes back to standby).
5. Press key to confirm. The display shall show "WAITING" to indicate the waiting state.
6. Once the handset is registered, you will hear a confirmation tone. The handset automatically exits
the registering mode.
7. The handset number assigned automatically by the base appears on the screen.
9.3.
Disassociation of a handset
This function allows you to de-register a handset from your base.
1. Press . Select "advanced set" using the or key, press
2. Using the or key, select "unregister". Press
3. Enter the 4 digit base master PIN code (default 0000). Each time a digit is entered the «_» is
replaced by a «*». Press
4. Select the handset you want to delete (at standby state, "pls reg h/s" is displayed on the screen).
You will hear a long beep confirmation tone.
to confirm.
key to confirm your selection. You will hear a confirmation tone.
key, select " registration ". Press
or
key for 5 seconds (after 1 minute if no Handset has started association process
key to confirm.
.
.
.
.
.
- 15 -
.