SAGEMCOM D16V User Manual page 11

Transfering an external call to another handset registred on same base
1. During a call, press
2. Enter the internal call number. When the user answers, you can announce the call.
3. Press the
Note!
To
signal is heard.
Note!
If the called handset does not answer, press
D16V/D18V/D21V
Making conference calls (3-way conversation)
You can connect one external call to two handsets registered at the base station. All users can talk
and listen simultaneously:
1. Press
2. Enter the internal call number. Wait until the internal user answers.
3. Press and hold
"conference" is displayed on the handset screen.
6.3.2. Two outside calls
Taking a second call while you are already on line
During a call, a beep is emitted by your operator to inform you that a second call is on hold. A screen
displays the number of this second caller on hold.
Press then the key
Your first contact is put on hold and you can talk with the second caller.
Making a second call while you are already on line
During a conversation, press
The call in process is then put on hold and you can take the second call back.
Switching from one call to the other
To switch from one call to the other, press
The call in process is then put on hold and you can take the second call back.
Ending one of the two calls
To end one call and continue with the other, press
The call in process is then ended finally and you take the second call back.
To set up a 3-way conference (the 2 calls and yourself)
During a conversation, press
You can then talk with the 2 contacts at the same time.
To end the 3-way conference, press the red key
. The external user is put on hold.
key to transfer the call.
switch from one call to another, press and hold down the
key. The external user is put on hold.
key, until an aural signal is heard to start a three-way conference.
to take back this new call.
then dial the number to be called.
then the key
to take back the call.
then the key .
then the key
.
.
- 11 -
key
until an aural
.