SAGEMCOM D16V User Manual page 3

* : depending on country
D16V/D18V/D21V
default, your handset name and number are displayed on the idle screen. You can change this display.
Place the handset in the base station to charge for 15 hours prior to first use. if you don't properly
charge the phone, battery performance will be compromised.
9. Plug one end of the telephone line cord into the modular wall phone jack and the other end into
the jack on the base.
10. After charging, press
ted near to the device, and must be easily accessible.
** The voice mail number can be programmed. To change it, refer to « Assign a shortcut » page
9.
For this purpose, press and hold down the key
displayed on the screen
To return to the previous display, press and hold down the key
key, you can hear dial tone.
Only use the supplied power adapter, connect it to the base socket according to the
installation instructions provided in this booklet and the indications on the identification
label affixed to it (voltage, current, electric network frequency). As a safety measure, you
can use the power adaptors to cut off the 230V current in case of danger. They must be
.
- 3 -
: The current time and date are
.