Playing Messages Using The Handset; Deleting Messages - SAGEMCOM D16V User Manual

A beep is issued after each message is broadcast and the next message is broadcast automatically.
Note!
For the
Use it only after 2 seconds as from the start of message playback.
Note!
pressing the key) to answer at
11.5.1. Listen again to the current message
Press the key during the playback of the message.
11.5.2. Listen again to the previous message
Press the key twice to hear the previous message again.
11.5.3. Go to the next message
During playback of the message, press the
11.5.4. Stop the playback of the messages
the key to stop the playback of the messages.
Press
Press the key a second time in order to play again the current message.
11.6.

Playing messages using the handset

If you have received new messages, the indicator light of the
icon flashes on the handset.
. Select "answ machine "using the or key, press
1. Press
2. Select "Play" using the or key, press
D16V/D18V/D21V
11.7.

Deleting messages

11.7.1. Deleting the current message
During the playback of the message, press the
The message in progress is deleted:
- If you have other messages, the next message is broadcast.
- Otherwise, the answering machine returns to standby mode.
11.7.2. Deleting all messages already played back
1. In standby mode, hold down the
This beep informs you that all your messages already played back have been deleted.
- OR -
1. Press . Select "answ machine "using the or key, press
key to operate correctly,
When a message is being left by a correspondent, you can open the line (by
any time.
key to skip to the next message.
.
key.
key until you hear a beep.
- 21 -
key flashes blue and the
.
.