Table of Contents
Advertisement
25
ADVANCED SETTINGS
ADVANCED SETTINGS
This function allows you to set the functions relating to the
handset.
Recall Time
Registeration
Unregister
Change PIN.
Reset
Setting the flash time
If you connect your telephone to an automatic PBX or in a foreign
country, you may need to change the flash time in order to use
your telephone correctly for the following functions: call hold,
three party conference calls.
Contact your operator to provide you with the appropriate
duration and carry out a new setting operation.
Go to »Menu« / »Advanced Set« / »Recall Time«.
Select the flash time by moving the browser up
Press the »O O K« key to confirm the selection.
Registering a new handset
You can register up to five handsets on your base unit. It will then
be possible for you to make calls between handsets.
Remark:
Calls between handsets are only possible when
handsets are registered on the same base unit.
calls between handsets (internal) are not charged
by the operator.
Keep the paging key of the base unit pressed until an audible
signal is heard.
Go to »Menu« / »Advanced Set« / »Registeration«.
Enter the PIN code (Personal Identification Number), factory
setting: 0000).
Press »O O K« to register the handset on the base unit.
To cancel the handset registration, press the »B B ACK« key.
Once registration is complete, the handsets will display the
available handset number (between 1 and 5).
or down
.
Advertisement
Table of Contents
