Modifying Alarm Tone; Alarm Clock - SAGEMCOM D16V User Manual

8.2.
Date format / Hour format
8.2.1. Hour format
1. Press , select "clock&alarm" using the or key, Press
2. Using the or key, select "set format". Press .
Using the or key, select "time format". Press .
3.
4. Use or to select format.
5. Press key to confirm your selection. You will hear a confirmation tone.
8.2.2. Date format
This function allows you to define the date format (DD/MM ou MM/DD).
1. Press , select "clock&alarm" using the or key, Press
Using the or key, select "set format". Press
2.
3. Using the or key, select "date format". Press
4. Use or to select format.
5. Press key to confirm your selection. You will hear a confirmation tone.
English
8.3.

Alarm clock

To set the date and time:
1. Press , select "clock&alarm" using the or key, Press
2. Using the or key, select "alarm". Press
3. To activate the alarm once, select "on once ".
4. To repeat the alarm each day at the programmed time, select "on daily ".
5. To deactivate the alarm, select "off ".
6. Select your choice then press
Use the touch tone pad to enter the current alarm time. Enter minutes first (format is
HH:MM).
(If, after entering the time, the time format is 12H, use the key to set aM and the key to set
pM).
7. Press key to confirm your selection. You will hear a confirmation tone.
8.4.

Modifying alarm tone

1. Press , select "clock&alarm" using the or key, Press
2. Using the or key, select "alarm tone". Press
3 melodies are available: "melody 1", "melody 2" and " melody 3".
3. Select the desired melody.
4. Press key to confirm your selection. You will hear a confirmation tone.
.
.
:
.
- 14 -
.
.
.
.
.