Modify The Answering Machine Mode; Modifying The Outgoing Message (Ogm) - SAGEMCOM D16V User Manual

11.1.1. From the base
- To deactivate your answering machine, press the
light of the key goes off.
- To activate your answering machine, press again
indicator light of the key turns on blue and the announcement that will be used is broadcast.
Note!
Each time you power on your base, the answering machine goes to its previous state
(activated or deactivated).
11.1.2. From the handset
1. Press . Select "answ machine" using the or key, press
Select "answ. ON/OFF" using the or key, press
2.
3. Select "ON" or "off" using the or key to activate or deactivate your answering machine, press .
11.2.

Modify the answering machine mode

1. Press . Select "answ machine" using the or key, press
2. Select "answer mode" using the or key, press
Select "answ. &record" or "answer only" using the or key, press
3.
.
You will hear a confirmation tone.
D16V/D18V/D21V
11.3.

Modifying the outgoing message (OGM)

11.3.1. Recording a personal outgoing message
1. Press . Select "ANSw machine " using the or key, press
Select "record ogm" using the or key, press
2.
3. Select "answ. & record" or "answer only" using the or key, press
Select "record ogm" using the or , press
4.
5. Clear state your announcement close to the base.
6. At the end of your announcement, press . A confirmation beep is issued.
If you make a mistake while recording the announcement, repeat the operations described above
until you are satisfied with your announcement. The maximum recording duration for an
announcement is 120 seconds.
Note!
The recording start and end beeps are not part of your announcement.
.
.
.
.
- 19 -
key on the base. The indicator
the key on the base. The
.
.
.
.