Playing Messages Using The Base - SAGEMCOM D16V User Manual

Note!
The recording of a new announcement will automatically replace the previous
announcement.
11.3.2. Playing outgoing message
. Select "answ machine " using the or key, press
1. Press
Select "record ogm" using the or key, press
2.
Select "answ. &record." or "answer only" using the or key, press
3.
.
4. Select "play" using the or key, press The announcement that will be used is
broadcast.
After broadcasting the announcement, your answering machine will return to standby mode.
Note!
If no announcement is recorded, you will hear a beep.
11.3.3. Delete your personal outgoing message
If you have not saved a personal announcement, the answering machine will
automatically use one of the pre-recorded announcements.
1. Press . Select "answ machine "using the or , press .
2. Select "record ogm" using the or key, press
Select "Answ. &record" or "answer only" using the or key, press
3.
4. Select "delete" using the or key, press
The anonymous announcement corresponding to the current answering machine mode
(simple/recorder) is automatically played.
At the end of the playback, the announcement is deleted and you are back to the previous
English
11.4.
Adjusting the volume of the base speaker
To adjust the listening level, press the
The new volume is changed directly on the speaker.
Press successively the key
11.5.

Playing messages using the base

If you have received new messages, the indicator light of the
icon flashes on the handset screen.
Press the key to listen to your messages:
- If you have new messages, only the latter will be played, from the most recent one to the oldest
one.
- If you have no new messages, all the older messages will be played, from the most recent to the
oldest one.
.
.
key or the
or the key on the base until you obtain a satisfactory
- 20 -
.
.
.
.
key on the base.
key flashes blue and the
Note!
menu.
level.