Memory Dialling - SAGEMCOM D16V User Manual

15.3.
Unit beeps
4.
or keyor
the- Place handset in "ECONOMy" mode, Press base for 20 seconds . to reset the security
code. If that doesn't work, charge battery for 15 hours.
12.2.
Remote access to answering machine
-
base with a soft cloth.
- See solutions for «No dial tone».
Your answering machine - Replace battery. can be interrogated remotely. This function lets you
play back your messages and set up your answering machine from another telephone located
outside your home.
15.4.

Memory dialling

12.2.1
- Did you program the memor
correctly?
- Did you follow proper dialling sequence?
-Press Make sure the tone/pulse setting is correct. . Select "answ machine " using the or
1.
key, press .
- Did you reprogram numbers into memory after power outage or battery replacement.
2. Select "settings" using the or key, press
Select "remote acc." using the or key, press
3.
Use or to select "activate" or " deactivate " setting.
4.
5. Press
D16V/D18V/D21V
16. Guarantee
16.1.
Terms and Conditions for United Kingdom & Ireland only
In order to apply the guarantee, you should contact the Sagem Communications Helpdesk or the
retailer where you purchased the equipment. Proof of purchase will be required in either case.
Please make sure that you use your equipment only for the purpose for which it was designed and
under normal usage conditions.
Sagem Communications do not accept any liability for the equipment if used outside the frame of
its original designed purpose or any consequence that may arise from this usage.
Should any malfunction arise, the Sagem Communications Helpdesk or your retailer will advise you
how to proceed.
A) General Guarantee conditions
Sagem Communications undertakes to remedy by repair or exchange at its own convenience, free
of charge for labour and replacement parts, any defects in the equipment during the guarantee
period of 12 (twelve) months or 3 (three) months for accessories, from the date of original invoice
of the Equipment, where those defects are a result of faulty workmanship.
Unless the customer has concluded with Sagem Communications a maintenance contract in
respect of the equipment which specifically provides for repairs to be carried out at the customer's
premises, the repairs will not be carried out on the equipment at the customer premises.
The customer must however return the defective equipment at his/her own expense, to the address
supplied by the Sagem Communications Helpdesk or by the retailer.
In the case that a product needs to be sent in for a repair, it must always be accompanied by a
proof of purchase (which is not altered, written on or in any way made illegible) showing that the
product is still under guarantee. In the case that no proof of purchase is enclosed, the Sagem
In the list, select the desired number of rings (between 2 and 7) using the
. Activate/deactivate remote access
key to confirm your selection. You will hear a confirmation tone
1
- 26 -
Clean charging contacts on handset and
.
.
y location keys