Listen-In Time; Programming The Listen-In Time - Sensaphone 1104 User Manual

4.7 Listen-in Time

The Listen-in Time is the amount of time you can listen to sounds
from the Model 1104's built-in microphone at its installation site.
When you call in for a Status Report, the Model 1104 announces
Listen-in Time at the end of its first round of status readings,
saying, "Listen to the sound level for (programmed time entered). "
The programmable range is from 0 to 255 seconds (or up to 4.17
minutes). The default value is 15 seconds.
The microphone is also used to monitor high sound
level. See Chapter 5, Section 5.10 through Section
5.11.1.

4.7.1 Programming the Listen-in Time

To program the Listen-in Time:
1. Press SET.
SET
#
2. Press LISTEN TIME. The Model 1104 will respond: "Enter
seconds. "
9
LISTEN TIME
SOUND
3. Using the number keys, enter the seconds. The Model 1104
will recite the digits as they are pressed.
1
CALL
DELAY
4
MAX CALLS
7
RECOGNITION
TIME
4. Press ENTER. The Model 1104 will respond: "Enter. "
ENTER ENTER
TONE TONE
PM PM
Chapter 4: Communications Programming
NOTE
2 3
VOICE INTERCALL
REPS TIME
6
5
TEMP LIMITS CALIBRATE
9
8
LISTEN TIME
CLOCK
SOUND
0
ID NUMBER
POWER
47