Other Monitoring - Sensaphone 1104 User Manual

Other Monitoring:

Problem
(continued from previous page)
5. The batteries drain prematurely.
If the solutions offered above do not appear to correct the problem, apply the following steps, in the order shown.
• Remove the batteries.
• Unplug the unit.
• Wait one minute for the Model 1104 to completely power down.
• Plug in the unit's AC adaptor into a standard 120 VAC outlet.
• Replace the batteries.
Refer to Chapter 2, Installation, for additional information on batteries and installation procedures.
Cause
The unit's AC transformer is unplugged or for
some other reason, full AC power is not avail-
able to the unit.
Solution
The batteries will take over powering the unit
when the AC transformer is unplugged from
the 120 VAC outlet. When storing the unit, be
sure to remove the batteries.
Refer to Chapter 2, Section 2.4.
Be sure to use alkaline batteries—do not
use rechargeable nicad batteries.