Step 2: Set The Id Number - Sensaphone 1104 User Manual

Press CONFIGURE.
STATUS
CONFIGURE
6. The Model 1104 will audibly recite the new configuration for
each of the four inputs, responding with "OK, " if it detects
N.O. (normally open), "beep-OK, " if it detects N.C (normally
closed) or "Temperature, " if it detects temperature (regardless
of whether all the inputs have attached sensors or not). If an
input is unused, it is treated as normally open.

Step 2: Set the ID Number

It is recommended that you set the ID number to reflect the
telephone number on which the Model 1104 is installed.
1. Press SET
.
SET
#
2. Press ID NUMBER.
0
ID NUMBER
POWER
3. Using the number keys, enter the digits (up to 16 are
permitted) for the ID number. The Model 1104 will recite the
digits as they are pressed.
1
CALL
DELAY
4
MAX CALLS
7
RECOGNITION
TIME
4. Press ENTER. The 1104 will respond: "Enter. "
3
2
VOICE INTERCALL
REPS TIME
6
5
TEMP LIMITS CALIBRATE
9
8
LISTEN TIME
CLOCK
SOUND
0
ID NUMBER
POWER
Chapter 3: Quick Start
27