Splicecom Maximiser Installation And Reference Manual page 270

Installation and Reference Manual
Upgrade files have been saved.
5 Reboot the PCS 570/560 at a convenient time and the phone will be upgraded.
Upgrading the Software on the PCS 410/400
Before starting the relevant software patch must be sent to the Call Server as described from page 258.
You will require the following files:
PCS 410 – pcs410.tar.gz
PCS 400 – this is supplied with the software patch for the Call Server.
Upgrading locally on the PCS 410
1 On the PCS 410 lift the handset.
2 Press the screen while rebooting the unit.
3 As soon as the message "
let go of the screen
4 The message "
Press screen before the bar completes to erase the config"
appear. Wait until the load bar is complete.
5 The message "
Press screen before the bar completes to erase the code
appear.
6 Press the screen
7 When the message "
appears let go of the screen
8 The unit will be upgraded and the reboot will complete
The version of software being used by the PCS 410/400 can be viewed by pressing the More Options
icon twice and then the Information
Upgrading locally on the PCS 400
1 On the PCS 410/400 lift the handset.
2 Press the screen while rebooting the unit.
3 The unit will be upgraded and the reboot will complete
Please note that this method will also default the unit's configuration.
Upgrading remotely via Telnet
You will need to know the IP address of the PCS 410/400 which is displayed on the handset by pressing
the More Options icon twice and then the Information
current software version being used by the handset.
Alternatively, a list of the IP addresses for each PCS 410/400 can be viewed in Manager by selecting
Utilities and then IP Addresses.
You will also need to know the phone's Password which is configured in Manager within the relevant IP
Phones' configuration form. By default this is set to 7388.
264
Files will be installed at next reboot.
Press screen to erase all, release for options"
Code will be erased.
icon.
Please release screen to continue
icon. This screen will also display the
Installation and Reference Manual v3.2/0410/6
appears
will
" will
"
Maintenance & Troubleshooting