Barco MDRC-1219 (TS) User Manual page 30

5. Important information
Immunity test
At 80 MHz and 800 MHz, the higher frequency range applies.
2. Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land mobile radios, amateur
radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically with accuracy. To assess the electromagnetic
environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the
location in which the MDRC-1219 (TS) is used exceeds the applicable RF compliance level above, the MDRC-1219 (TS) should be
observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as re-orienting
or relocating the MDRC-1219 (TS).
3. Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3 V/m.
28
IEC 60601-1-2 4
th
edition (2014)
Test levels
K5902128 (451920612451) MDRC-1219 (TS) 03/11/2016
Compliance level
Electromagnetic
environment –
guidance
d = 1.2√P 80 MHz to 800
MHz
d = 2.3√P 800 MHz to 2.5
Ghz
Where P is the maximum
output power rating
of the transmitter in
watts (W) according
to the transmitter
manufacturer and d
is the recommended
separation distance in
meters (m).
Field strengths from
fixed RF transmitters,
as determined by an
electromagnetic site
2
survey, should be less
than the compliance
level in each frequency
3
range.
Interference may occur in
the vicinity of equipment
marked with symbol: