Important Information; Safety Information - Barco MDRC-1219 (TS) User Manual

19” 1mp (multi-touch) color lcd display
Hide thumbs Also See for MDRC-1219 (TS):
Table of Contents

Advertisement

5. IMPORTANT INFORMATION

5.1

Safety information

General recommendations
Read the safety and operating instructions before operating the device.
Retain safety and operating instructions for future reference.
Adhere to all warnings on the device and in the operating instructions manual.
Follow all instructions for operation and use.
Electrical Shock or Fire Hazard
To prevent electric shock or fire hazard, do not remove cover.
No serviceable parts inside. Refer servicing to qualified personnel.
Do not expose this apparatus to rain or moisture.
Modifications to the unit:
Do not modify this equipment without authorization of the manufacturer.
Type of protection (electrical):
Monitor with internal power supply: Class I equipment.
Degree of safety (flammable anesthetic mixture):
Equipment not suitable for use in the presence of a flammable anesthetic mixture with air or with oxygen
or nitrous oxide.
The equipment shall not be operable when the air oxygen content is above 25%.
Non-patient care equipment
Equipment primarily for use in a health care facility that is intended for use outside the patient area.
The equipment may not be used with life support equipment.
The user should not touch the equipment, nor its signal input ports (SIP)/signal output ports (SOP)
and the patient at the same time.
Mission critical applications
We strongly recommend there is a replacement monitor immediately available in mission critical applica-
tions.
Use of electrical surgical knives
Provide as much distance as possible between the electrosurgical generator and other electronic equip-
ment (such as monitors). An activated electrosurgical generator may cause interference with them and
can disrupt the functionality of the display.
Power connection – Equipment with internal power supply
This equipment must be earthed.
Power requirements: The equipment must be powered by the AC mains voltage.
The equipment is intended for continuous operation.
K5902128 (451920612451) MDRC-1219 (TS) 03/11/2016
5. Important information
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents