3.12 PRINT 3 Mode ([X] key):
Not Required on the Production Line
Print a test pattern.
Press the [X] key, and the LCD displays as shown in
<Figure
3.12-1>.
PRINT 3
Figure 3.12-1
If an error occurs before printing, press any key to return to the beginning.
Start printing by pressing the key below. The LCD displays as shown in
<Figure 3.8-
2>.
For European/North American models: [OK] or [ENTER]
Turn OFF the power by pressing the key below.
For European/North American models: [ON/OFF]
Margin: Chain. Unlimited printing of 6-"H"s.
Figure 3.12-2 PRINT 3 Printing Pattern
III - 39