3.11 PRINT 2 Mode ([7] key):
Not Required on the Production Line
Print a test pattern.
Press the [7] key, and the LCD displays as shown in
<Figure
3.11-1>.
PRINT 2
Figure 3.11-1
If an error occurs before printing, press any key to return to the beginning.
Start printing by pressing the key below. The display as shown in
<Figure
3.8-2> will
appear.
For European/North American models: [OK] or [ENTER]
Turn OFF the power by pressing the key below.
For European/North American models: [ON/OFF]
Start printing the half dot pattern and all black (set size 12 mm).
Margin: Narrow
Figure 3.11-2 PRINT 2 Printing Pattern
III - 38