3.4 Write Setting Mode ([1] key):
Required on the Production Line
Be sure to provide power supply of DC12.0V ±0.1V / DC9.0V ±0.1V [Insert resistant
1Ω ±5% (2W and more)] for the inspection from DC power or AA battery.
3.4.1
Head Rank Set Mode
Press the [OK] or [ENTER] key at the state of
and the LCD displays as shown in
Press the [OK] or [ENTER] key to proceed to the display shown in
The current head rank will be displayed on the right bottom of the LCD.
The indication of the head rank will be changed simultaneously by pressing the [1] to
[3], [
] or [
* The head rank is set to "B" by default.
After setting the head rank to "A", "B" or "C", proceed to "Write Country Set" by
pressing the [OK] or [ENTER] key.
Current head rank shown on the right bottom of the LCD.
Head rank setting
A
B
C
<Figure
HEAD RANK SET
Figure 3.4-1 Write Head Rank Mode
] key while this screen is displayed.
1 : A 2 : B 3 : C
Figure 3.4-2
LCD
A
B
C
<Figure
3.2-1>, or press the [1] key,
3.4-1>.
[ B ]
III - 22
<Figure
3.4-2>.