Clean The Sensor - BEAUTY ANGEL 770 SUN Operating Instructions Manual

Cleaning and maintenance
58/78
– Turn the lamp 90°.
The lettering must be oriented towards the outside (i.e. towards the tan-
ning room or towards the user).
4.9

Clean the sensor

NOTE:
Do not spray the sensor directly with detergent.
Always remove the sensor from the station for cleaning.
– Remove the sensor from the base station.
– Clean the sensor housing, measuring window and base station with a
soft, damp cloth. See separate instructions (order no. Cleaning the sen-
sor).
– Replace the sensor into the base station.
WARNING!
Do not rub with a dry cloth – danger of scratching!
Failure to comply voids any warranty claims.
– For the fast, hygienic and proper cleaning of the sensor
and base station, use specially developed cleaning
agents.
– Concentrated disinfectants or solvents (e.g. Lysoform,
ethyl alcohol or other fluids containing alcohol) must
not be used.