Navigation; Functions - ergoline ESSENCE 48 SMART POWER Operating Instructions Manual

Operation
Function Button sequence Description
1. Lamps
5. Body cooling
6. Volume
32/58
3.4.1

Navigation

The device is operated with the navigation ring.
Switch on lamps:
Tip the button once.

Switch off lamps/pause tanning:
Hold the button.

Select device function (go to pictogram)
e.g. VOLUME
Select sub-function (if available)
Change setting
The diodes of the available functions and the navigation ring are illuminated in
default mode after starting up the tanning device. After selecting a function,
the respective diodes and the navigation ring flash for a few seconds. Settings
can be changed during this time.
Operation – Demonstration mode
– press until
The audio functions can be tested in demonstration mode. You have
30 seconds in which to select the function.
3.5

Functions

START/STOP
Switch the lamps on/
off during tanning
Regulate body cooling,
level 1-5
Switch off cooling
Switch on cooling
Internal:
Control volume,
levels 0-15
External:
MP3 player or smartphone
Information
If the lamps are switched off during tanning, the
tanning time continues to run.
The diodes next to the symbol illuminate accord-
ing to the level set.
and 1: only the diode at the bottom illu-
minates; 2 and 3: the diodes in the middle and at
the bottom illuminate; 4 and 5: all three diodes
illuminate.
See page 34.
The diodes next to the
symbol illuminate according to the level set.
0-4: only the diode at the bottom illuminates;
5-9: the diodes in the middle and at the bottom
illuminate;
10-15: all three diodes illuminate.