Table of Contents
Advertisement
Safety information for maintenance and care
Extreme danger! High voltage!
During maintenance work there is a risk of touching live
parts and receiving a fatal electric shock.
DANGER!
– Disconnect device from power supply before opening –
also see Page 28.
– Do not reach behind covers and do not open the device
with the device switched on.
– Refit any safety devices (e.g. switches) after the work
has been completed.
Maintenance and care play a major role in deciding whether the device
meets the requirements placed on it in a satisfactory manner. The com-
pliance with the specified maintenance intervals and the careful conduct-
ing of the maintenance and care work are therefore absolutely necessary
– see Page 33.
The current operating hours of the parts requiring maintenance can be
displayed in the Presetting mode – see separate instructions "Preset-
tings", Order no. 1003844.
Danger of burns!
Only use the specified genuine UV lamps and filter pa-
nels!
DANGER!
Using other UV lamps leads to modified radiation. This
could potentially result in severe burns to the user!
CAUTION!
Only use genuine spare parts of the same type!
The use of other parts may limit or void your manufacturer's
warranty!
Any liability is excluded in case of damage or injury proven
to be the result of the use of non-genuine spare parts.
Fire hazard!
High-pressure lamps that have not been approved by Er-
goline can explode. Hot lamp components can set other
components on fire. People can be killed or severely in-
jured due to smoke inhalation and fire.
– Only fit high-pressure lamps recommended by Ergo-
line.
– Clean the inside of the tanning device regularly. Dust-
particles are combustible!
...
27
Hide quick links:
Advertisement
Table of Contents
