Texas Instruments TMS320C2x User Manual page 5

Related Documentation From Texas Instruments
Notational Conventions / Related Documentation From Texas Instruments
Square brackets ( [ and ] ) identify an optional parameter. If you use an op-
-
tional parameter, you specify the information within the brackets; you do
not enter the brackets themselves. Here is an example of a command that
has an optional parameter:
clist asmfile [outfile] [−options]
The clist command has three parameters.
J
The first parameter, asmfile, is required.
J
The second and third parameters, outfile and −options, are optional.
J
If you omit the outfile, the file has the same name as the assembly file
J
with the extension .cl.
Options are preceded by a hyphen.
J
The following books describe the TMS320C2x/C2xx/C5x and related support
tools. To obtain a copy of any of these TI documents, call the Texas Instru-
ments Literature Response Center at (800) 477−8924. When ordering, identify
the book by its title and literature number (located on the bottom-right corner
of the back cover).
TMS320C2x User's Guide (literature number SPRU014) discusses the hard-
ware aspects of the 'C2x fixed-point digital signal processors. It de-
scribes pin assignments, architecture, instruction set, and software and
hardware applications. It also includes electrical specifications and pack-
age mechanical data for all 'C2x devices. The book features a section
with a 'C1x-to-'C2x DSP system migration.
TMS320C2xx User's Guide (literature number SPRU127) discusses the
hardware aspects of the 'C2xx fixed-point digital signal processors. It de-
scribes pin assignments, architecture, instruction set, and software and
hardware applications. It also includes electrical specifications and pack-
age mechanical data for all 'C2xx devices. The book features a section
comparing instructions from 'C2x to 'C2xx.
TMS320C5x User's Guide (literature number SPRU056) describes the
TMS320C5x 16-bit, fixed-point, general-purpose digital signal proces-
sors. Covered are its architecture, internal register structure, instruction
set, pipeline, specifications, DMA, and I/O ports. Software applications
are covered in a dedicated chapter.
Related Documentation From Texas Instruments
Read This First v