Installing The Fan Tray - Dell EMC PowerEdge R940 Installation And Service Manual

Figure 29. Removing the fan tray
Next steps
If applicable, install the fan tray.
Related links
Removing the air shroud
Removing the fan cage
Removing the expansion card riser

Installing the fan tray

Installing the fan tray
Prerequisites
1 Follow the safety guidelines listed in
Steps
1 Holding the fan tray, align the slots on the fan tray with the standoffs on the system.
2 Lower the fan tray into the system until the slots on the fan tray engage with the standoffs on the system.
3 Push the sides of the fan tray toward the sides of the system until the release tabs click into place.
76 Installing and removing system components
Safety instructions.